Combined shredders Combi: Model 80/80S - GR 700 - ISVE Recycling

Cumberland inside

The unit is made up of a model 80/80S shredder group working in line with a GR 700 granulator.

Characteristics of the shredder:

Very thick welded sheet steel support;
Support for barrel roller bearings with sealing system against dust and liquids;
Anti-wear interchangeable side plates with separating interspace of the cutting chamber from bearing-holder flanges;
High thickness shafts with 42 special anti-wear steel cutters and 42 conveyor disk to facilitate gripping of bulky objects;
Graduated arrangement of cutter teeth for better taking and cut progress;
No.2 epicyclic reduction gears with rotation axes parallel to the cutter axis;
No.2 7,5 or 11 kW SIEMENS motors;
Drive system in oil bath with steel gears and pinions;
800×800 mm cutting chamber;
Electrowelded sheet metal hopper for front or top loading fitted with sliding cover and anti fly-back rubber protections

Steel case, very thick welded steel rotor holder structural work, equipped with an open central rotor with a diameter of 400 mm and working width of 700 mm with interchangeable and reliable high-alloy steel cutters.
400 x 700 mm load door;
Soundproofed housing chamber, equipped with door with safety for extracting the granulator group to facilitate the regular maintenance operations;
Cutter disks group axially adjustable;
Interchangeable screen for sizes up to 4 mm;
Drive by means of high resistance trapezoidal belts on flywheel;
22 kW motor positioned on slide to better adjust the tension of the belts;
The production of material in grain form varies in relation to the type of piece to be round and the size of the round items required. On an average it is possible to produce between 500 to 700 Kg per hour.

Electrical board built according to CEE rules and provided with power limiting device inverting cutters motion in the case the working charge of the machine is higher than the programmed value;
Main internal board for the control of all the plant peripheral units.
Colour touch screen display to adjust all the machine parametres and control peripheral units.
Software agganged to control loading systems, refining grinder, and suction plant.
Emergency control functions for stopping the plant in the case of accidental introduction of ferrous material.
10 work programmes of which 2 are standard for optimising the shredding fases of the different materials:
Off cycle system with sequential switching off of aspirator, granulator and shredder;
Made to CE standards.

Shredding chamber inspection door with micro switch.
Unit complete with grain extractor made up of: grain collection tray, aspiration fan VR 80 (kW 4) incorporated in the soundproof bed, galvanised sheet metal connection piping, cyclone, coated steel big-bag support, start from COMBI switchboard.
Soundproof shredder hopper in deadening material for a total noise of the equipment of 80/82 dB.
Ferrite magnetic bar tray for removal of iron particles from the round material to be assembled under the cyclone. Manual cleaning discontinuous system.
Blade level sensor to be placed in the big-bag to control automatic switch off of the unit.