MR48200 STANDARD LIBRETTO_001 - Copia

Single-shaft shredders: Model MR 48-200

The MR 48-200 single-shaft grinder is suitable for processing large quantities of industrial waste. The heavy structure makes the machine suitable for heavy duty.
The pusher drawer is operated via a hydraulic power unit. The product to be ground is thus pushed towards a tool-holder rotor which causes it to be crushed. Thanks to a grid, the final dimensions of the ground can be selected.

Main characteristics:

  • rotor installed power: 55 + 55 kW (75 + 75 HP)
  • hydraulic power unit: 7,5 kW (10 HP)
  • transmission: by belts
  • nr. rotors: 1
  • rotor diameter: 480 mm
  • rotor length: 2,000 mm
  • nr. reversible tools: 95
  • nr. usable tool sides: 4
  • nr. average rotor speed / min: 80
  • Weight: 12.000 kg
  • Indicative production: 3.5-5 t / hour
  • safety equipment: emergency stop, drawer reversal system;
  • execution to CE standards

Accessories on request:

  • loading belts;
  • interchangeable hopper;
  • interchangeable screen;
  • ground material packaging systems;
  • refiner for wood and plastic (for pieces smaller than 14 mm).

Application notes:

Large machine, suitable for grinding numerous waste materials. It can be inserted in line for continuous operation. Recommended for shredding waste wood, thick plastic, paper, confidential documentation, extruded sheets, rubber scraps, electric cables, hospital waste, etc.

Grinder features:

  • Sturdy electro-welded steel frame mounted on anti-vibration feet;
  • Bearing supports with sealing system against dust and liquids;
  • Thick rotor diameter 480 mm long 2.000 mm equipped with nr. 95 tool holder plates and nr. 95 wear-resistant highly alloyed steel tools that can be used 4 times;
  • Nr. 4 lower counterblades and nr. 4 upper adjustable counterblades in highly wear-resistant alloy steel;
  • Hydraulically operated pusher drawer with 850 mm of usable stroke equipped with push cylinders;
  • Hydraulic unit thermostated with oil cooling radiator;
  • Transmission system by pulleys and belts to prevent rotor vibrations from damaging the mechanical parts;
  • Hydraulic coupling coupling between motor and reduction unit;
  • Nr. 2 multi-voltage, multi-frequency motors of primary national house of 55 kW with PREMIUM efficiency class (IE3) and nr. 1 7.5 kW motor for hydraulic unit;
  • Cutting chamber with dimensions of mm. 2,000 X 1100 mm;
  • Electrowelded sheet hopper for loading from above;
  • Interchangeable screen that determines the size of the shredded material;
  • Base equipped with unloading auger for the evacuation of the ground material (optional)

Control system features:

  • Electrical panel in accordance with EEC standards, equipped with a torque limiter that reverses the rotor motion if the machine’s work load exceeds the set value;
  • SIEMENS S7-1200 PLC for the control of all the peripherals of the system;
  • 6 inch color touch screen display for adjusting all machine parameters;
  • Software designed to control loading systems, refiner mill and suction system;
  • New self-regulation program “AUTO TUNING ISVE”;
  • Emergency control functions for stopping the system;
  • ISVE MAINTENANCE PROGRAM: maintenance schedule indicated on the touch screen;
  • PREPARATION FOR TELEASSISTANCE SYSTEM AND “SAFETY SERVER CONNECTION ISVE” (real-time monitoring of machine parameters from ISVE server);
  • The production of chipboard material varies according to the type of pieces to be shredded and the size to be obtained. In general, a production of 3.5-5 t / hour can be assumed.
  • Execution to CE standards.

Accessories:

  • ISVE Server Connect: módulo adicional de conexión a Internet con servicio de monitoreo automático en el servidor ISVE del correcto funcionamiento del sistema de molienda.
MR40140 STANDARD LIBRETTO_001 - Copia

Single-shaft shredders: Model MR 40-140

The MR 40-140 singe-shaft equipped shredder is particularly suitable to shred high quantities of industrial wastes.
The heavy structure makes the machine suitable to realize an heavy use.
A hydraulic control unit allows driving the pusher drawer. Thus, the product to be grinded is pushed towards a tools-holder rotor causing its crushing.
Thanks to a screen it is possible to select the final dimension of the shredder material.

Main features:

  • Power installed on the rotor: 75 kW (HP 100)
  • Power of the hydraulic control unit: 5,5 kW (HP 7,5)
  • Drive: by belts
  • Number of rotors: 1
  • Rotor diameter: 400 mm
  • Rotor length: 1400 mm
  • Number of reversible tools: 78
  • N° of usable tools sides: 4
  • Average number of rotor revolutions per min: 83
  • Weight: 7.000 Kg
  • Production: 2,5-3,5 t/h.
  • Safety devices: emergency stop, drawer reversal system
  • Manufactured according to EC standards.

Accessories on request:

  • Loading belts;
  • Interchangeable hopper;
  • Interchangeable screen;
  • Shredded material packaging system;
  • Refiner for timber and plastic (for sizes lower than 14 mm)

Explanatory notes:

Big sized multipurpose machine suitable for shredding wide range of waste materials.
It can be introduced into a line to operate in continuous working. Recommended for shredding pieces of wood, high thickness plastic material, paper, confidential documents, extruded sheets, rubber wastes, wooden pall, etc.

Characteristics of the shredder:

  • Strong welded steel framework;
  • Support for barrel roller bearings with sealing system against dust and liquids
  • High thickness rotor with diameter of 400 mm and length of 1400 mm. It is equipped with 68 tools-holder plates and 68 high alloyed anti-wear tools usable 4 times;
  • No. 6 adjustable counter-blades (upper and lower)made in very alloyed anti-wear steel.;
  • Pusher drawer with hydraulic driving with no 2 pushing cylinders.
  • Hydraulic unit thermostatically controlled with oil cooling radiator;
  • Pulleys and belts drive system to avoid damaging mechanical due to rotor vibrations.
  • Hydraulic coupling between motor and reduction group.
  • Nr. 1 multi-voltage, multi-frequency motor of primary national house of 75 kW with PREMIUM efficiency class (IE3) and nr. 1 5.5 kW motor for hydraulic unit;
  • 1400X1300 mm cutting chamber;
  • Welded sheet metal hopper for top loading;
  • Interchangeable screen establishing the size of the shredded material;
  • Base equipped with unloading system for shred material evacuation (optional)

Characteristics of control system:

  • Electric switchboard complying with EEC standards, equipped with torque limiting device which inverts the direction of the pusher drawer if the work load of the machine exceeds the set value;
  • S7-1200 SIEMENS PLC to control all the plant peripheral units;
  • SIMATIC SIEMENS touch screen to adjust all the parameters of the machine;
  • Software prepared to control the loading system, the grinder and the suction plant.
  • Emergency control functions for stopping the system;
  • ISVE MAINTENACE PROGRAM: it signals the ordinary maintenance interventions at their expiry date.
  • The production of shredder material varies depending on the type of piece to be ground and the size of the ground items required. On an average it is possible to produce between 2,5-3,5 t per hour
  • Made to CE standards.

Accessories:

  • ISVE Server Connect: additional internet connection module with automatic monitoring service on the ISVE server of the correct operation of the grinding system.
  • Additional grid that determines the size of the ground material (diam. 14-16-20-25-30-35 mm).
  • Cap connectable to suction system.
  • Rotor cooling system.
  • Wear-resistant coating for rotor.
  • Pusher drawer with stroke increased to 1300 mm.

Specific accessories for grinding electric cables:

  • Rotor protection tile (prevents materials in the hank from overloading the rotor).
  • Shredder stop software in case of overloading of separation system / refiner mill.
MR40120 LIBRETTO_001 - Copia

Single-shaft shredders: Model MR 40-120

The MR 40-120 singe-shaft equipped shredder is particularly suitable to shred high quantities of industrial wastes.
The heavy structure makes the machine suitable to realize an heavy use.

Main features:

  • Power installed on the rotor: 55 kW (75 HP)
  • Power of the hydraulic control unit: 5,5 kW (HP 7)
  • Drive: by belts
  • Number of rotors: 1
  • Rotor diameter: 400 mm
  • Rotor length: 1200 mm
  • Number of reversible tools: 55
  • N° of usable tools sides: 4
  • Average number of rotor revolutions per min: 85
  • Weight: 5.000 kg
  • Production: 1,8-2,5 t/h.
  • Safety devices: emergency stop, drawer reversal system
  • Manufactured according to EC standards.

Accessories on request:

  • Loading belts;
  • Interchangeable hopper;
  • Interchangeable screen;
  • Shredded material packaging system;
  • Refiner for timber and plastic (for sizes lower than 14 mm)

Explanatory notes:

Big sized multipurpose machine suitable for shredding wide range of waste materials.
It can be introduced into a line to operate in continuous working. Recommended for shredding pieces of wood, high thickness plastic material, paper, confidential documents, extruded sheets, rubber wastes, etc.

Characteristics of the shredder:

  • Strong welded steel framework;
  • Support for barrel roller bearings with sealing system against dust and liquids
  • High thickness rotor with diameter of 400 mm and length of 1200 mm. It is equipped with 55 tools-holder plates and 55 high alloyed anti-wear tools usable 4 times;
  • No. 2 adjustable counter-blades (upper and lower)made in very alloyed anti-wear steel.;
  • Pusher drawer with hydraulic driving with 850 mm of usable run equipped with no 2 pushing cylinders.
  • Hydraulic coupling between motor and reduction group.
  • Hydraulic unit thermostatically controlled with oil cooling radiator;
  • Pulleys and belts drive system to avoid damaging mechanical due to rotor vibrations.
  • 1 multi-voltage, multi-frequency motor of primary national house of 55 kW with PREMIUM efficiency class (IE3) and nr. 1 5.5 kW motor for hydraulic unit;
  • 1200X1300 mm cutting chamber;
  • Welded sheet metal hopper for top loading;
  • Interchangeable screen establishing the size of the shredded material;
  • Base equipped with unloading system for shred material evacuation (optional).

Characteristics of control system:

  • Electric switchboard complying with EEC standards, equipped with torque limiting device which inverts the direction of the pusher drawer if the work load of the machine exceeds the set value;
  • S7-1200 SIEMENS PLC to control all the plant peripheral units;
  • SIMATIC SIEMENS touch screen to adjust all the parameters of the machine;
  • Software prepared to control the loading system, the grinder and the suction plant.
  • Emergency control functions for stopping the system;
  • ISVE MAINTENACE PROGRAM: it signals the ordinary maintenance interventions at their expiry date.
  • The production of shredder material varies depending on the type of piece to be ground and the size of the ground items required. On an average it is possible to produce between 1,8-2,5 t per hour
  • Made to CE standards

Accessories:

  • ISVE Server Connect: additional internet connection module with automatic monitoring service on the ISVE server of the correct operation of the grinding system.
  • Additional grid that determines the size of the ground material (diam. 14-16-20-25-30-35 mm).
  • Cap connectable to suction system.
  • Upper hopper closure with side window equipped with rubber straps to prevent material from escaping during grinding.
  • Rotor cooling system.
  • Wear-resistant coating for rotor.
  • Pusher drawer with stroke increased to 1300 mm.

Specific accessories for grinding electric cables:

  • Rotor protection tile (prevents materials in the hank from overloading the rotor).
  • Shredder stop software in case of overloading of separation system / refiner mill.

 

MR40100 LIBRETTO_001 - Copia

Single-shaft shredders: Model MR 40-100

The MR 40-100 singe-shaft equipped shredder is particularly suitable to shred high quantities of industrial wastes.
The heavy structure makes the machine suitable to realize an heavy use.

Main features:

  • Power installed on the rotor: 45 kW (60 HP)
  • Power of the hydraulic control unit: 4 kW (HP 5,5)
  • Drive: by belts
  • Number of rotors: 1
  • Rotor diameter: 400 mm
  • Rotor length: 1000 mm
  • Number of reversible tools: 45
  • N° of usable tools sides: 4
  • Average number of rotor revolutions per min: 85
  • Weight: 4.400 kg
  • Production: 1,5-2 t/h.
  • Safety devices: emergency stop, drawer reversal system
  • Manufactured according to EC standards.

Accessories on request:

  • Loading belts;
  • Interchangeable hopper;
  • Interchangeable screen;
  • Shredded material packaging system;
  • Refiner for timber and plastic (for sizes lower than 14 mm)

Explanatory notes:

Big sized multipurpose machine suitable for shredding wide range of waste materials.
It can be introduced into a line to operate in continuous working. Recommended for shredding pieces of wood, high thickness plastic material, paper, confidential documents, extruded sheets, rubber wastes, etc.

Characteristics of the shredder:

  • Strong welded steel framework;
  • Support for barrel roller bearings with sealing system against dust and liquids
  • High thickness rotor with diameter of 400 mm and length of 1000 mm. It is equipped with 45 tools-holder plates and 45 high alloyed anti-wear tools usable 4 times;
  • No. 2 adjustable counter-blades (upper and lower)made in very alloyed anti-wear steel.
  • Pusher drawer with hydraulic driving with 850 mm of usable run;
  • Hydraulic unit thermostatically controlled with oil cooling radiator;
  • Pulleys and belts drive system to avoid damaging mechanical due to rotor vibrations.
  • 1 multi-voltage, multi-frequency motor of primary national house of 45 kW with PREMIUM efficiency class (IE3) and nr. 1 4 kW motor for hydraulic unit;
  • 1000X 1300 mm cutting chamber;
  • Welded sheet metal hopper for top loading;
  • Interchangeable screen establishing the size of the shredded material;
  • Base equipped with unloading system for shred material evacuation (optional)

Characteristics of control system:

  • Electric switchboard complying with EEC standards, equipped with torque limiting device which inverts the direction of the pusher drawer if the work load of the machine exceeds the set value;
  • S7-1200 SIEMENS PLC to control all the plant peripheral units;
  • SIMATIC SIEMENS touch screen to adjust all the parameters of the machine;
  • Software prepared to control the loading system, the grinder and the suction plant.
  • Emergency control functions for stopping the system;
  • ISVE MAINTENACE PROGRAM: it signals the ordinary maintenance interventions at their expiry date.
  • The production of shredder material varies depending on the type of piece to be ground and the size of the ground items required. On an average it is possible to produce between 1,5-2 t per hour
  • Made to CE standards.

Accessories:

  • ISVE Server Connect: additional internet connection module with automatic monitoring service on the ISVE server of the correct operation of the grinding system.
  • Additional grid that determines the size of the ground material (diam. 14-16-20-25-30-35 mm).
  • Cap connectable to suction system.
  • Upper hopper closure with side window equipped with rubber straps to prevent material from escaping during grinding.
  • Rotor cooling system.
  • Wear-resistant coating for rotor.
  • Pusher drawer with stroke increased to 1300 mm.

Specific accessories for grinding electric cables:

  • Rotor protection tile (prevents materials in the hank from overloading the rotor).
  • Shredder stop software in case of overloading of the separation system / refiner mill.

 

MR4080 STANDARD ISVE LIBRETTO_001 - Copia

Single-shaft shredders: Model MR 40-80

The M 40-80 single-shaft equipped shredder is particularly suitable to shred high quantities of industrial wastes.
The heavy structure makes the machine suitable to realize an heavy use.

A hydraulic control unit allows driving the pusher drawer. Thus, the product to be grinded is pushed towards a tools-holder rotor causing its crushing.
Thanks to a screen it is possible to select the final dimension of the shredder material.

Main features:

  • Power installed on the rotor: 37 kW (50 HP)
  • Power of the hydraulic control unit: 4 kW (HP 5,5)
  • Drive: by belts
  • Number of rotors: 1
  • Rotor diameter: 400 mm
  • Rotor length: 800 mm
  • Number of reversible tools: 35
  • N° of usable tools sides: 4
  • Average number of rotor revolutions per min: 85
  • Weight: 4.000 kg
  • Production: 800-1.200 t/h.
  • Safety devices: emergency stop, drawer reversal system
  • Manufactured according to EC standards.

Accessories on request:

  • Loading belts;
  • Interchangeable hopper;
  • Interchangeable screen;
  • Shredded material packaging system;
  • Refiner for timber and plastic (for sizes lower than 14 mm)

Explanatory notes:

Big sized multipurpose machine suitable for shredding wide range of waste materials.
It can be introduced into a line to operate in continuous working. Recommended for shredding pieces of wood, high thickness plastic material, paper, confidential documents, extruded sheets, rubber wastes, etc.

Characteristics of the shredder:

  • Strong welded steel framework;
  • Support for barrel roller bearings with sealing system against dust and liquids
  • High thickness rotor with diameter of 400 mm and length of 800 mm. It is equipped with 35 tools-holder plates and 35 high alloyed anti-wear tools usable 4 times;
  • No. 2 adjustable counter-blades (upper and lower)made in very alloyed anti-wear steel.;
  • Pusher drawer with hydraulic driving with 850 mm of usable run;
  • Hydraulic unit thermostatically controlled with oil cooling radiator;
  • Pulleys and belts drive system to avoid damaging mechanical due to rotor vibrations.
  • 1 multi-voltage, multi-frequency motor of primary national house of 37 kW with PREMIUM efficiency class (IE3) and nr. 1 4 kW motor for hydraulic unit;
  • 800X 1300 mm cutting chamber;
  • Welded sheet metal hopper for top loading;
  • Interchangeable screen establishing the size of the shredded material;
  • Base equipped with unloading system for the shred material evacuation (optional).

Characteristics of control system:

  • Electric switchboard complying with EEC standards, equipped with torque limiting device which inverts the direction of the pusher drawer if the work load of the machine exceeds the set value;
  • S7-1200 SIEMENS PLC to control all the plant peripheral units;
  • SIMATIC SIEMENS touch screen to adjust all the parameters of the machine;
  • Software prepared to control the loading system, the grinder and the suction plant.
  • Emergency control functions for stopping the system;
  • ISVE MAINTENACE PROGRAM: it signals the ordinary maintenance interventions at their expiry date.
  • The production of shredder material varies depending on the type of piece to be ground and the size of the ground items required. On an average it is possible to produce between 0,8-1,2 t per hour
  • Made to CE standards.

Accessories

  • ISVE SERVER CONNECT: additional internet connection module with automatic monitoring service on the ISVE server of the correct operation of the grinding system;
  • Additional grid that determines the size of the ground material (diam. 14-16-20-25-30-35 mm).
  • Cap connectable to suction system.
  • Upper hopper closure with side window equipped with rubber straps to prevent material from escaping during grinding.
  • Rotor cooling system.
  • Wear-resistant coating for rotor.

Specific accessories for grinding electric cables:

  • Rotor protection tile (prevents materials in the hank from overloading the rotor).
  • Shredder stop software in case of overloading of the separation system / refiner mill.
MS2260 STANDARD 2020 LIBRETTO_001 - Copia

Single-shaft shredders: Model MS 22-60

The MS 22-60 single-shaft equipped shredder is particularly suitable to shred high-consisting wastes.
A hydraulic control unit allows driving the pusher drawer. Thus, the product to be grinded is pushed towards a tools-holder rotor causing its crushing.
Thanks to a screen it is possible to select the final dimension of the shredder material.

Main features:

  • Power installed on the rotor: 18,5 kW (25 HP)
  • Power of the hydraulic control unit: 2,2 kW (Hp 3)
  • Drive: by belts
  • Number of rotors: 1
  • Rotor diameter: 220 mm
  • Rotor length: 600 mm
  • Number of reversible tools: 27
  • N° of usable tools sides: 4
  • Average number of rotor revolutions per min 85
  • Weight: 1.800 kg
  • Production: 200-400 kg/h.
  • Safety devices: emergency stop, drawer reversal system
  • Manufactured according to EC standards.

Accessories on request:

  • Loading belts;
  • Interchangeable hopper;
  • Interchangeable screen;
  • Shredded material packaging system;
  • Refiner for timber and plastic (for sizes lower than 14 mm)

Explanatory notes:

Small-medium sized multipurpose machine suitable for shredding wide range of waste materials.
It can be introduced into a line to operate in continuous working. Recommended for shredding pieces of wood, high thickness plastic material, paper, confidential documents, extruded sheets, small tires, etc.

Characteristics of the shredder:

  • Strong welded steel framework;
  • Support for barrel roller bearings with sealing system against dust and liquids;
  • High thickness rotor with diameter of 220 mm and length of 600 mm. It is equipped with 23 tools-holder plates and 23 high alloyed anti-wear tools usable 4 times;
  • No. 2 adjustable counter-blades (upper and lower)made in very alloyed anti-wear steel;
  • Pusher drawer with hydraulic driving with 500 mm of usable run;
  • Pulleys and belts drive system to avoid damaging mechanical due to rotor vibrations;
  • Nr. 1 multi-voltage, multi-frequency motor of primary national house of 18.5 kW with PREMIUM efficiency class (IE3) and nr. 1 2.2 kW motor for hydraulic unit;
  • 600 X 700 mm cutting chamber;
  • Welded sheet metal hopper for top loading;
  • Interchangeable screen establishing the size of the shredded material;
  • Base equipped with drawer connectable to the aspiration system (wood sector) or protection sheet with safety micro.

Characteristics of control system:

  • Electric switchboard complying with EEC standards, equipped with torque limiting device which inverts the direction of the pusher drawer if the work load of the machine exceeds the set value;
  • Main internal board (LOGO SIEMENS) for the control of all the plant peripheral units;
  • Emergency control functions for stopping the system;
  • The production of shredder material varies depending on the type of piece to be ground and the size of the ground items required. On an average it is possible to produce between 200 and 400 Kg per hour
  • Made to CE standards.

Accessories

  • Interchangeable screen establishing the size of the shredded material (diam. 14-16-20-25-30-35 mm).
  • Cap connectable to suction system with 160 mm diameter outlet connection
  • Collection tray for ground material equipped with nr. 4 swivel wheels, inspection plexiglass window, fixing knobs and safety micro.
  • Upper hopper closure with side window equipped with rubber straps to prevent material from escaping during grinding.
  • Rotor cooling system.

SPECIFIC ACCESSORIES FOR ELECTRIC CABLE MILLING:

  • Rotor protection tile (prevents materials in the hank from overloading the rotor).
  • Shredding stop software in case of overloading of the separation system / refiner mill.

 

 

 

 

 

601010.00.000.0 LIBRETTO_001 - Copia

Single-shaft shredders: Model MR 17-40

The MR 17-40 single-shaft equipped shredder is particularly suitable to shred small wastes with high resistance. A hydraulic control unit allows driving the pusher drawer. Thus, the product to be grinded is pushed towards a tools-holder rotor causing its crushing. Thanks to a screen it is possible to select the final dimension of the shredder material.

Main features:

  • power installed on the rotor: 7,5 kW (10 HP)
  • power of the hydraulic control unit: 0,75 kW (1 HP)
  • drive: by belts
  • number of rotors: 1
  • rotor diameter: 170 mm
  • rotor length: 400 mm
  • number of reversible tools: 12
  • n° of usable tools sides: 4
  • average number of rotor revolutions per min.: 95
  • weight: 800 kg
  • production: 80-150 kg/h
  • safety devices: emergency stop, drawer reversal system
  • manufactured according to EC standards

Accessories on demand:

  • loading belts;
  • interchangeable hopper;
  • interchangeable screen;
  • shredded material packaging systems;
  • refiner for timber and plastic (for sizes lower than 14 mm).

Explanatory notes:

Small sized multipurpose machine suitable for shredding wide range of waste materials.

It can be introduced into a line to operate in continuous working. Recommended for shredding pieces of wood, plastic material, paper, confidential documents, sheets, rubber pieces, etc.

Characteristics of the shredder:

  • Strong welded framework;
  • Support for barrel roller bearings with sealing system against dust and liquids;
  • High thickness rotor with diameter of 170 mm and length of 400 mm. It is equipped with 12 tools-holder plates and 12 high alloyed anti-wear tools usable 4 time;
  • Adjustable counter-blades made in very alloyed anti-wear steel;
  • Pusher drawer with hydraulic driving with 350 mm of usable run;
  • Pulleys and belts drive system to avoid mechanical damaging due to rotor vibrations;
  • N° 1 motor of kW 7,5 for rotor activation;
  • N° 1 motor of kW 0,75 for hydraulic pump with thermostat for oil and cooling radiator;
    400X400 mm cutting chamber;
  • Welded-sheet metal hopper for top loading;
  • Interchangeable screen establishing the size of the shredded material.

Characteristics of the control system:

  • Electric switchboard complying with CEE standards equipped with torque limiting device which inverts the direction of the pusher drawer if the work load of the machine exceeds the set value;
  • Main internal board (LOGO SIEMENS) for the control of all the plant peropheral units;
  • Emergency control functions for stopping the system.

The production of shredded material varies according to the type of piece to be grounded and the size of the grounded item required. On an everage it is possible to produce between 80 and 150 kg per hour.

  • Made to Ce standards.

Accessories

  • Interchangeable screen establishing the size of the shredded material (diam. 14-16-20-25-30-35 mm).
  • Collection drawer for ground material
  • Upper hopper closure with side window equipped with rubber straps to prevent material from escaping during grinding.

Specific accessories for grinding electric cables:

  • Rotor protection tile (prevents materials in the hank from overloading the rotor).
  • Shredder stop software in case of overloading of the separation system / refiner mill.
macinatori_monoalbero

Single-shaft shredders “MR” series

Pusher-drawer single shaft grinders.

Machines studied for the grinding of other materials and high cutting endurance, such as plastic blocks and plates, different types of wood, paper, extruded polymer tubes, etc.

A hydraulic drawer is pushing the material against the rotating tools holder which performs the pre-rupture and the grinding. In case of overloading, the rotor and the drawer automatically reverse the movement to release the material and avoid structural overloads. In the end the product is screened by a perforated grate to determine the final size of the ground material.

 

FROM TO
Rotor power KW 11 110
Hydraulic switchboard power KW 0,75 7,5
Rotor length mm 400 2.000
Rotating blades 12 95
Fixed blades 1 2
Sieve size mm 14 60
Weight Kg 1.000 12.000
Production Kg/hour 80/150 3.500/5.000

Safety equipment: emergency stop, shutdown button, electronic control.

 

 

Working and main features of the single-shaft shredders

A pusher-drawer with hydraulic drive (4) pushes the material towards a tools-holder (3) roller (2) which carries out the first breaking and thanks to its rotation and to the COUNTER-BLADE action (6) makes a first breaking and the shredding of the product.
The product passes through a drilled screen, which allows establishing the final sizes of the material.

Detail of the roller (2) with the tools (3)

 


Operation phases

1. Beginning grinding phase

2. Hydraulic drawer pushing action on the rotor

3. Material advanced grinding

NB: in case of excessive effort, the drawer might invert the direction to release the material that had been loaded to avoid structural overloads.

 


PARALLEL AXIS REDUCER

The mounted reducer used for the ISVE MR series is of the “heavy” type to guarantee the use of the machine for very demanding processes (loaded plastic blocks, technical polymers, paper reels, PET rolls, wood essences of all types, etc.). The reduction unit is connected by means of a reaction arm to the shock absorber.

SHOCK ABSORBER FOR REDUCER

During grinding, the shear strength of the material transmits strong vibrations to the reducer. All our machines are equipped with a “shock absorber” to guarantee maximum transmission reliability.

DOUBLE BLADE

The cutting unit has two counterblades, one lower and one upper (in the figure). The presence of two counterblades allows to maintain high productions with grids with holes with a diameter of less than 20 mm.

Each blade is equipped with adjustment screws to facilitate positioning of the fixed blades.

MULTI-PURPOSE ROTOR FOR RECYCLING

The rotor has very thick square plates (40X40 mm) with a concave surface, which can be used 4 times. The fixing system foresees the head of the screw placed behind the cutting surface. This allows the tool to be dismantled easily, preventing the fixing system from being damaged during grinding.

PUSH DRAWER GUIDES

The hydraulic pusher drawer has the function of bringing the material closer to the rotor to promote grinding. The drawer is kept in the guide by the sliding bars located on all 4 sides. Adjustable bushings guarantee maximum cleaning of the sliding tracks.

 

 

SEE ALL MODELS

 


SERIE “S” ISVE: WATCH THE DIFFERENCE!!!


 

SIEMENS ENGINES

To warrant the best quality to our products all our “MR” series shredders are equipped with SIEMENS motors.

 


HEAVY STRUCTURE

The frame and structure of our single-shaft shredders are made of high-thickness sheets and tubular. This gives big resistance against the most demanding jobs.


TOUCH PANEL

The new control unit of our “MR” series shredders (MR2260 model excluded) is made up of the S7-1200 SIEMENS PLC. To facilitate the programming and running of the shredders and its associated peripherals, the user can use an easy touch panel. The system has been designed to be of quick comprehension and easy to use. With a single gesture it is possible to activate loading conveyer belts, refiningg and suction systems. The control can be centralized and automated.


ISVE MAINTENANCE PROGRAM

The new control system (MR2260 model excluded) allows to signal to the operator the ordinary maintenance intervention at its expiry date.


AUTO TUNING PROGRAM

(MR1740 and MR2260 excluded) in addition to the possible setting of 8 differents programs, the machine has a new function that auto-adjusts working parameters in fuction of the material to shred.


ISVE SERVER CONNECT

(MR1740 and MR2260 excluded) with an additional form, every machine can be connected on-line through the office net or with an UMTS card (against covering verification). With this system, the grinder functioning is monitorized directly from the mother-house. Moreover, software uploads and remote functioning parameters regulation are available.


CAMERA INSIDE

All our shredders are equipped with a camera placed near the loading hopper. The operator could easily check the correct running of the machine through the electrical board.

 

trituratori_4_alberi

Industrial four-shafts shredders

Isve 4-shafts shredders for bulky waste.

Fit for small and medium enterprises allow to reduce the production waste volume for reusing or disposal, with minimum power consumption, little noise and high reliability. Equipped with control PLC to settle their operation, they come with interchanging screen to determine the final size of the ground material. They can operate with plastic materials, cardboard, wood, packaging, residual skin and leather, barks, cans, bundles and others. Maintenance can be made directly by the user with specific keys and technical book.

Traditional “Tritotutto” 4-shafts industrial shredders represent the vintage I.S.V.E. shredding line on the market for over 10 years.

Industrial shredders are machines able to shred all types of waste, whether urban or industrial such as plastic materials, paper, cardboard, wood, packaging, shells, fruit stones, leather and hide waste, bark, cans, tyres, copper items.

 


Why choose an I.S.V.E. industrial shredders?

  • They are ideal for small-medium sized companies.
  • They are versatile, and adapt to different kind of waste.
  • Shredders have low energy consumption.
  • Shredding plants have low noise.

These industrial shredders can be customized to meet customer requirements thanks to a wide range of accessories: K2D cutters, supplementary screen, automated loading hopper, automated loading box and trolley cum hopper, conveyor belts, big-bag packaging system.

 


Working and main features

Loading unit:
Hopper (1).

Shredding unit:
4 shafts with sharp elements constituted by sharp-corners disks (3) provided with hooks (2).

Every hook has the task to hook the product and drive-it towards the cutters (4) assembled onto two or more counter-rotating motors-shaft which will realize a sharp-cut of the material.

Motor drive:
Alternated current asynchronous electric motor. Drive by epicyclic reduction gears.
Connexion between cutter-holder shafts and conveyor with oil bath gears.

Product evacuation unit:
Screen (5) with sizes from 14 to 35 mm allowing checking granulometry.

Re-circulation:
Bigger pieces are put in circle again for a further shredding.
In case of smaller screen holes, passages of product between shredding group and times increase.

Maintenance:
User can easily disassemble disks by him self.
The machine is equipped with a clear technical manual explaining how to make the operation. Easily access to mechanical parts.

Security device:
It reverses temporarily cutters movement preventing structural overloading or machine breaking in case of excessive quantities to shred or material that cannot be shred. This device allows an excellent adjusting of grinding group to not penalize productivity and regular working

 

FROM TO
Temperate milling cutters 13 26
Input disks 13 26
Input width mm 250×660 1.600×1.600
Sieve size mm 14 80
Power KW 7.5 150
Weight Kg 900 21.500
Production Kg/hour 80/150 8.000/10.000
Safety equipment: emergency stop, shutdown button, electronic control.

 

SEE ALL MODELS

 


SERIE “S” ISVE: WATCH THE DIFFERENCE!!!


 

SIEMENS ENGINES

To warrant the best quality to our products all our “S” series shredders are equipped with SIEMENS motors

 


HEAVY STRUCTURE

The frame and structure of our shredders are made of high-thickness sheets and tubular. This gives big resistance against the most demanding jobs.


ANTI-TORSION SHAFT

The dissection, the high-precision mechanical workings and the steels of high-quality make the tools-holder axis of our “S” series shredders particularly resistant against stress warranting long life during time.


TOUCH PANEL

The new control unit of our “S” series shredders (66, 4080S and 6080S model excluded) is made up of the S7-1200 SIEMENS PLC. To facilitate the programming and running of the shredders and its associated peripherals, the user can use an easy touch panel. The system has been designed to be of quick comprehension and easy to use. With a single gesture it is possible to activate loading conveyor belts, refining and suction systems. The control can be centralized and automated.


ISVE MAINTENANCE PROGRAM

The new control system (66, 4080S and 6080S model excluded) allows to signal to the operator the ordinary maintenance intervention at its expiry date.


ISVE SERVER CONNECT

with an additional form, every machine can be connected on-line through the office net or with an UMTS card (against covering verification). With this system, the grinder functioning is monitorized directly from the mother-house. Moreover, software uploads and remote functioning parameters regulation are available.


CAMERA INSIDE

All our shredders are equipped with a camera placed near the loading hopper. The operator could easily check the correct running of the machine through the electrical board.

ISVE RECYCLING

Your needs are our challenge

I.S.V.E. designs and manufactures shredding equipments such as single-shaft shredders, double-shaft shredders, four-shaft shredders, combined systems and granulators customised to meet customer requirements.

www.isverecycling.com

What are your recycling needs?

ISVE Srl | P.IVA 00942240177 | Privacy | Cookie policy | Tags
ISVE GROUP