SHREDDING GRINDING GRANULATING SYSTEMS
Since 1977, the widest range of shredders, grinders and granulators on the market for any industrial waste recycling need.
For some processes, the use of the screen under the shredder may not be necessary.
Help the operator to optimize screen replacement or restoration times, it has been necessary for this German customer, where the plant was equipped with an automated removal system.
The MR40120, MR40140 and MR48200 models are now also available in a different version with increased hydrualic pusher driving. Therefore, It goes from standard 850 mm to 1,300 mm.
This allows to shred bulky materials more easily, like wooden pallets, plastic bins of 1.000 liters, ecc.The high efficiency of the hydraulic unit made with BOSCH – REXROTH components and the thrust pressure exerted by the double hydraulic cylinders guarantee maximum productivity.
Single-shaft shredder mod. MR40120 for shredding industrial cigarette wastes. The plant has just been installed and tested with great customer satisfaction.
The machine is able to process entire pallet of material ensuring the total destruction of the contents even using screens of small diameter with no troubles.
With the start of 2017, ISVE proposes an extension of its 4-shaft shredder range. The 90S series is one of the lightest shredders in the 80S series and the ones for the most heavy-duty 100S.
Among the main innovations of the product, there is the possibility of extracting the grid laterally, even in an automated manner. In this case the machine is able to change the coarse size output (use without grid) to more or less fine depending on the screen selected.
There are 3 models available with a 800X900 mm cutting chamber, 1,000X900 mm and finally 1,200X900 mm. Among the options, in addition to the traditional loading and unloading systems, there is a hydraulic pusher to help grip particularly light or bulky materials.
Thanks to the architecture of our ISVE SERVER CONNECT control system, in many cases it is possible to fulfill the requirements of Industry 4.0 that provide the possibility of self-certifying the plant to take advantage of the 250% HYPERTORT.
The products that can be included in the facilitated category are machine tools to recover materials and functions from industrial waste and end-of-life products (for example machines for disassembly, separation, crushing, chemical recovery).
The requirements are as follows:
- Control by CNC and / or PLC;
- Interconnection to factory IT systems with remote loading of instructions and / or part programs;
- Automated integration with the logistics system of the factory or with the supply network and / or other machines in the production cycle;
- Simple and intuitive interface between man and machine;
- Compliance with the highest standards of safety and hygiene at work;
- Telecommunication and / or radiodiagnosis and / or remote control systems;
- Continuous monitoring of working conditions and process parameters by means of appropriate sets of sensors and adaptability to process drifts.
The MR48200 single-shaft milling machine installed for an Indian multinational company, a leader in the production of plastic film, has been in operation for over a year now.
The machine is equipped with a large loading belt, where the production waste (reels, sheets and purge blocks) can be loaded from the forklift. The grinder cuts the plastic with a 20 mm diameter grid.
Control cameras, pushed automation and integrated with other customer production machines, remote assistance system and 24 month warranty, allowed our company to win the order.
The same customer has now asked us to extend the supply to other factories of the group.